Universele head up display via OBD2, model Q02, 5.5 inch

Kenmerken

Conditie: Nieuw

Beschrijving

Universele head up display via OBD2, model Q02, 5.5 inch

NU TIJDELIJK GRATIS VERZENDEN VOOR NEDERLAND EN BELGIE.

Universele head up display via OBD2, model Q02, 5.5 inch. Projecteert alle dashboard informatie op de voorraad.

HUD Projector Head Up Display Futures:
1. Plug and play. HUD can auto adapt to vehicle type which in line with OBDII or EUOBD(On-Board Diagnostic System).
2. Comprehensive display. HUD can display many parameters at the same time as follows, vehicle speed, engine speed water tempe- rature (voltage, throttle valve position, ignition advance angle, time of 100 km acceleration), fuel consumption, mileage, low fuel tips, engine failure.
3. Diversiform display mode. Driver can chose normal display mode, high- speed display mode and automatic display mode.
4. Free switch. Km and mile can be switched freely to meet the need of inch auto meter.
5. Suitable size. The display area is 5.5 inches which is very clear for driver to read data.
6. Automatic power on and off. Starting with the vehicle starting, stopping with the vehicle stopping to protect the vehicle’s battery. Moreover we pre- serve the hand switch function to controlthe HUD.
7. Flexible alarm mode. HUD can offer single-stage and four-stage overspeed alarm modes to choose to make driving safer.
8. Engine speed alarm. It contributes to shift gear in time to save fuel also has significance to new driver.
9. Flexible brightness adjustment. The brightness can be adjusted automatically or manually to reach the best state which is in harmony with the environment.

Technical specifications:
1. Service conditions: Environment temperature: -400C—+800C Barometric
press: 86—106 KPa Relative humidity: 10%—95%Environment voice: <=60 dB(A)
2. Alarm of sound level:> =30dB(A)
3. Work voltage: 9V~16Vdc(12Vdc/400mA)
4. Size of product: 14x85x147 (mm)
5. Weight of product: 350g
6. All of the electronic components are conform to ROSH standards.
7. Conforming to the China Compulsory Certification.

Remarks:
Open and look for the sticker under the engine hood, can use this product if it has the sticker with OBDII CERTIFIED.
1. Check if it has the automobile diagnostic socket under the steering wheel
2. Identify the car's 16-pin diagnostic socket, connecting the OBDII cable to the 16-pin diagnostic socket if it has this socket.
3. Put the non-slip pad onto the instrument pane, then put HUD on the non-slip pad, you can adjust the angle an position.
4. The reflective film may be affixed to the forward position of HUD and stick to the front windshield, ensure that the information, such as car speed can be projected to the reflective film.

Wordt geleverd met:
1x HUD Q02 interface
1x OBD2 aansluitkabel
1x Mat
1x Handleiding (Engels)

Wilt u de volledige specificaties van dit product of ons volledige assortiment bekijken, bezoek dan onze webshop www.q24u.nl

Verzendkosten:
2.95 euro voor order tot 25 euro
4.95 euro voor order tot 100 euro
Boven de 100 euro altijd gratis verzenden
Ophalen in Boskoop en Gorinchem geen extra kosten.
Alle producten zijn nieuw en met garantie.

Bestellen en betalen kan eenvoudig in onze webshop www.q24u.nl

Tel nummer:
NL = 0183-513995
BE = 0031-183-513995

Q24U accepteert alle gangbare betaalmethodes zoals
iDEAL (gratis)
Achteraf betalen (1.99 euro)
Mister Cash – Bankcontact (gratis)
Sofortbanking (gratis)
Meest gebruikte Creditcards (toeslag 3% over orderbedrag)
PayPal (toeslag 3% over orderbedrag)
Rembours (10 euro toeslag)
Bankoverschrijving
Contant bij afhalen in Boskoop of Gorinchem

VOORDELEN Q24U
- Orders vanaf €100 gratis verzonden
- Verzenden binnen 24 uur
- Webshop keurmerk
- 14 dagen retour + 14 dagen retour sturen
- Afhalen in Boskoop en Gorinchem
- Veilig online betalen SSL verbinding
- Breed assortiment
- Installatie service

Q24U
Kvk: 52058123 Utrecht
BTW: NL850282330B01