Home > Hobby en Vrije tijd > Modelbouw - Radiografisch - Helikopters en Quadcopters

Micro Scisky 32bits Brushed Flight Control Board Based On...

Prijs: € 45,99
Regio: Lelystad, Flevoland
Sinds: 11 mei, 7:13
Bekeken: 0
AD ID: 92DWMW39
Voorzichtige handel, om te voorkomen dat bedrogen
Foto's

Kenmerken

Conditie: Nieuw

Beschrijving

Micro Scisky 32bits Brushed Flight Control Board Based On Naze 32 For Quadcopters

Typical use:



Description:

Size: 20.0*33.5*6.0mm (not including the USB protruding part)

Weight:2.5g (including DSM2 compatible 7CH receiver, serial port output)

Frequency for driving motor:2000 (the frequency can be set up by user, max frequency can be 32K)

Brushed ESC: continuous working current is 3.5A, max current is 5A(5S);

 

Feature:

Integrated with DCDC voltage booster circuit( output 5.0V/500Ma), it can supply power for other device through IIC and UART port;

The hardware of the FC is based on Naze 32, test firmware is cleanflight Naze V1.9.0 and V1.8.1.

 

Noting:

It will enters binding mode only after powered of 10 seconds automatically, you need to try to get transmitter  closer to the board,

something like 5cm will be better. No binding button on the board.



For firmware flash manual

 
Package Include:

1 x 32bits Brushed Flight Control Board

Bezoek onze webwinkel voor meer interessante producten!
Verwante advertenties
Kenmerken Conditie: Nieuw Beschrijving Micro Scisky 32bits Brushed Flight Control Board Based On Naze 32 For QuadcoptersTypical use: Description: Size: 20.0*33.5*6.0mm (not including the USB protruding part) Weight:2.5g (including DSM2 compatible 7CH
Kenmerken Conditie: Nieuw Beschrijving Upgrade NAZE32 SP Racing F3 Flight Control 6 DOF/10 DOF for MilticopterDiscriptions:Item Name: SP Racing F3 Flight Control NAZE32 Upgrade Version for  Milticopter Acro Deluxe VersionVersion: Acro 6DOFand Deluxe
Beschrijving Reprap Ramps-FD Control Board Ramps1.4 Improved Version For 3D PrinterIntroduction:When you use Arduino Due as the controller of your 3D Printer, you may find the RAMPS1.4 is not compatible with DUE. As you know the Arduino Due is a micr
Beschrijving Ultimaker PCB Control Board Compatible RAMPS 1.57 For 3D PrinterUltimaker PCB Control Board Compatible RAMPS1.57 For 3D PrinterIntroduction:This product is an Arduino MEGA as Ultimaker UltiStepper drive is compatible with Pololu stepper
Beschrijving Reprap Melzi 2.0 Control Board 1284P Prusa I3 Controller Board For 3D PrinterReprap Melzi 2.0 Control Board 1284P Prusa I3 Controller Board For 3D PrinterDescription:This is a Reprap Melzi Ardentissimo full featured board using the ATMEG
Beschrijving Reprap Ramps-FD Control Board Ramps1.4 Improved Version For 3D PrinterReprap Ramps-FD Control Board Ramps1.4 Improved Version For 3D PrinterIntroduction:When you use Arduino Due as the controller of your 3D Printer, you may find the RAMP
Kenmerken Conditie: Nieuw Beschrijving Saitek X52 Pro Flight Control SystemSaitek X52 Pro Flight Control SystemDit product wordt u aangeboden door Informatique, méér verstand van computers!Waarom Informatique? - Zeer ruim assortiment - Gratis verzend
Kenmerken Conditie: Nieuw Beschrijving Saitek X52 Flight Control SystemSaitek X52 Flight Control SystemDit product wordt u aangeboden door Informatique, méér verstand van computers!Waarom Informatique? - Zeer ruim assortiment - Gratis verzenden binne
Kenmerken Conditie: Nieuw Beschrijving BLH7907 Gimbal Control Board: GB 200 van: BLADENaast deze aanbieding heeft Trxxs-Winkel.nl nog veel meer aanbiedingen en artikelen.Uit Voorraad Geleverd & Scherp Geprijsd!Adres:Trxxs-winkel.nlDr v Beurdenstraat
Kenmerken Conditie: Nieuw Beschrijving Mini APM Pro Flight Control with NEO-6M GPS&Power Supply Module for Multicopter  PM:Description:Mini APM Pro:Using imported large current LDO instead of previous version 3.3V LDO to support outputting 500MA powe
Beschrijving ultimaker pcb control board compatible ramps1,57 voor 3d printerintroductie:Dit product is een arduino mega als ultimaker ultistepper station is compatibel met pololu stappenmotor driver boards. Het is erg vergelijkbaar met andere elektr
Beschrijving ramps 1,57 control board lcd 2004 board mega 2560 r3 a4988 driver kit voor 3d printerintroductie:Dit product is een arduino mega als ultimaker ultistepper station is compatibel met pololu stappenmotor driver boards. Het is erg vergelijkb
Kenmerken Conditie: Nieuw Beschrijving Rectangular Level Beads Balancer For Flight Control Motor SettingSpecification:Dimension: 10*10*29mmFeature:1. Simple horizontal beads. Bubble leveling principle, easy and intuitive.2. Square surface is more con
Beschrijving Megatronics is based on many famous open-source products including: Arduino Mega, RAMPS, SD Ramps. Therefor this product is an already proven design. It combines all major features of these board into a single board solution for more rel
Kenmerken Conditie: Nieuw Beschrijving Spedix KK2.15 Flight Controller LCD Version 2.15 Connected Directly To DSM2 DSMX Latest generation KK2.15 board with updated sensors, memory, header pins, and hard case protection.can be connected directly to a
Kenmerken Conditie: Nieuw Beschrijving De "RC EYE One" micro quad serie heeft zich verheven tot het volgende niveau, deRC EYE One XtremeEen kleine stap voor de mens, een reuzensprong voor de quadcopter-techniekMet de nieuwste 6 assige gyro stabi
Kenmerken Conditie: Nieuw Beschrijving 20cm APM 2.5 I2C Connector Wire Cable For APM 2.5 I2C Item Name: 20cm APM 2.5 I2C Connector Wire Cable Size: 20cm Feature: APM 2.5 I2C cable is used to APM flight control plate with the other with the I2C interf
Kenmerken Conditie: Nieuw Beschrijving RC EYE One XtremeEen kleine stap voor de mens, een reuzensprong voor de quadcopter-techniekMet de nieuwste 6 assige gyro stabilisatie technologie en uitstekende, fluisterstille brushless motoren!Borstelloze moto
Kenmerken Conditie: Nieuw Beschrijving PlayUavOSD FPV OSD Board for APM Pixhawk Px4 Flight Controller Apm use 5p connect with Telem:Pixhawk use6pconnect with TELEM1:Description:Item Name:PlayUavOSD Features:-Data graphically-Dual video inputs, it can
Kenmerken Conditie: Nieuw Eigenschappen: RTF (Ready to Fly) Type: Helikopter Type motor: Elektro Beschrijving De nieuwste gadget is de Micro Drone en deze is er nu in een versie met een ingebouwde HD camera om zelfs hiermee mooie opnamen te maken. De

Advertentie