Denon pma 900v

Kenmerken

Conditie: Gebruikt

Luidsprekersysteem: Stereo

Vermogen: 120 watt of meer

Merk: Denon

Beschrijving

Power amplifier section
Rated output (20Hz - 20kHz) 120W + 120W (8 )200W + 200W (4 )
Input sensitivity/impedance Processor loop input: 150mV/30k
Total height harmonic wave distortion factor 0.004% (20Hz - 20kHz and 52.5W, 8 )
Cross modulation distortion factor 0.003% (105W suitable, 8 )
Dynamic power 400W/2
TIM strain Below measurement limiting value
Through late Above ±350V/ sec
Output bandwidth 5Hz - 80kHz (52.5W, 0.03% and 8 )
Line input frequency 4Hz - 250kHz, +0 -3dB (1W, 8 )
Output impedance 0.1 Or less
Output terminal Spea ker: AorB: 6 - 16 , A+B: 12 - 16
Headphone jack installed capacity: 410mW (8 ), 8-400
Pre-amp section
Input sensitivity/impedancePhono MM: 2.5mV/47k Phono MC: 0.2mV/200 CD and Video1, 2, AUX/Tuner and Tape1, 2: 150mV/30k

Installed capacity/rated output (processor loop output containing) 10V/150mV
Total height harmonic wave distortion factor
(processor loop output containing) 0.002% (1kHz and 10V)
RIAA deviation
20Hz - 100kHz±0.3dB (MC IN - processor loop output containing)
< Synthesis >
Signal-noise ratio
(input short circuit and auditory sensation weighting A)
Phono MM: 95dB (at the time of 2.5mV input)
Phono MC: 77dB (at the time of 0.25mV input)
Line: 107dB (at the time of 150mV input)
Tone control quality
Bass: ±10dB (100Hz)
Treble: ±10dB (10kHz)
The sub sonic filter for Phono
16Hz, -12dB/oct
Picture in efficiency
Frequency characteristic: DC - 10MHz±1dB
Ra ted voltage/impedance: 1C$vp-p75
Electric power consumpt ion (electric supplies control method)
250W
Power source
AC220V and 50Hz/60Hz
External size
(the foot, the knob and the terminal etc. are included)
Width 434× height 157× depth 397mm